How To Clean Auger On Pit Boss

We've all been at that place: accidentally forgetting to cover your pellet grill while it rains exterior, or adding woods pellets to your grill when they're a piddling too moisture. Both of these situations can cause your Pit Boss 700FB Pellet Grill to finish working properly.

You'll be happy to know your Pit Boss Grill isn't cleaved forever; all you need to practise is fix your clogged auger.

After searching the net far and wide, we accept managed to come with a solution.

In this article, we'll go over all you need to know well-nigh unclogging your jammed auger, also as our peak tips to keep it clean and running.

What Is an Auger and How Does It Work?

A Pit Dominate pellet grill or pellet smoker uses woods to create a great smoke flavor contour.

These pellets are fed into the smoker, controlled by an electronic panel that helps maintain a steady grilling temperature.

All this is done with the help of the auger motor, feeding the pellets directly from the hopper and into the firepot.

This allows you to leave your Pit Boss grill to practise its job, requiring little babysitting from y'all.

Why Does It Get Chock-full?

One of the master things causing the auger on pellet grills to get jammed is due to wet pellets. If your wood pellets have been left to become moisture, or humidity has got to them, they'll not bad upwards and cause the auger to become jammed [one].

That'due south why it'due south of import to keep your pellet grill or smoker stored in a absurd and dry place, away from the rain.

If y'all've had your Pit Boss 700FB for a number of years or yous live in an environs that is humid, or in that location'south a lot of rain, chances are you'll have a chock-full auger every once in a while.

How Do You Unclog the Auger on a Pit Boss Grill?

To ready an auger jam, you'll need to remove quite a few pieces. This includes the control board, hopper, motor, and so the screws holding the part in place. Y'all may besides demand to use a pipe wrench to remove the auger.

In theory, this method should work on any Pit Boss or Pellet Smoker (including your 700FB), only the method may have to be modified slightly depending on your model.

Steps to Unclogging the Auger on a Pit Boss 700fb

As e'er, ensure your pellet grill is unplugged before you decide to practice any sort of maintenance on it.

If you struggle to unclog your auger, consider calling a professional to fix the jam in your Pit Boss motor.

If yous're more than mechanically inclined, feel free to follow our steps to gear up that clog:

What y'all'll demand:

• Screwdriver
• Socket wrench
• Allen wrench
• Chisel
• Vacuum

Step one: Removing The Bottom Panel

To start, you'll want to remove the auger from the Pit Dominate. To do then, you'll desire to lay your Pit Boss 700FB on its backside.

This will make information technology far easier for you to remove the bottom panel of the hopper.

Catch your screwdriver and remove the screws from the hopper. Once you've done so, move everything to the side and place the screws for safekeeping.

Footstep 2: Motion The Command Board

Next, you'll need to remove both of the screws from the control lath. Y'all'll find them on the pinnacle and the bottom of the panel. Once the screws have been removed, advisedly feed the control board through the hopper.

The control board shouldn't come all the way out. All you want to do is motion the board out of the way enough to get to the motor - practice not attempt to remove the wires that are securing it in place.

As long as you can remove the auger, it's fine to get out the wires dangling at the bottom of the hopper.

Step 3: Move The Hopper

On the hopper, you'll need to remove both the dorsum and front screws.

Make certain yous have a flat and steady surface to identify the hopper on before you go ahead and remove information technology.

Similar to the control board, the hopper is attached to the Pit Boss via the power cord so y'all won't be able to remove it completely.

Step 4: Remove The Bolt

Before yous're able to remove the auger from your Pit Boss, y'all'll need to remove the Allen head nut. Y'all tin use your Allen tool to remove this nut as well as a ratchet wrench. Make sure you have the right size wrench.

In one case you've removed the nut and bolt you tin can permit the motor hang at the bottom of the Pit Boss.

Step 5: Remove The Auger Screw

Once the motor has been removed, you'll notice one spiral holding the auger in place. Remove this screw with a piping wrench.

This will plow the auger counterclockwise so you can and then pull it out.

If the auger is all jammed upward, it'll take a bit more working force to get the auger free.

At that place isn't an additional step yous need to take other than turning the screw until information technology tin interruption free.

Cleaning The Auger

Once you've got the auger removed, you lot tin use sandpaper to break off the pellet. If you take pellets that are a lot easier to remove, y'all tin clean upward the tube by using a chisel to break them autonomously.

As you're removing the pellet with the chisel, y'all'll demand to go on vacuuming up the broken pieces.

Newspaper towels tin can clean whatever debris and grime remaining. When information technology becomes piece of cake for the auger to slide in and out, that ways it is nice and clean and ready to be put dorsum together.

The final step is to put everything back and stand the Pit Boss back upwardly.

When it comes to filling the hopper support, brand sure you lot're just using dry pellets. You lot may have to prime your grill tiptop earlier you begin cooking. If your fire pot begins filling up, that means your grill is ready and set to employ.

Read More:

• Who Makes Pit Boss Grills?
• Pit Boss Classic VS Pit Boss 700FB

Fixing Pit Boss 700FB Auger Jam: The Bottom Line

Cleaning upwards your auger isn't exactly an easy and quick procedure, and then to relieve yourself fourth dimension and ensure your Pit Boss is always working, only utilise dry pellets in your hopper.

Once you've taken apart your Pit Boss 700FB, always keep the screw close to you lot as they're easier lost than constitute.

---

References:

1. https://world wide web.woodpellets.com/blog/2015/02/05/what-happens-to-wet-wood-pellets/

Was this article helpful?

Yeah No

Source: https://carnivorestyle.com/pit-boss-700fb-auger-not-turning/

Share this post